CMOS battery replaced. Now just letting it charge.
Keyboard reassembled (mostly). I'm still sourcing a cable replacement. The one that I got had a plug that was too thick and wouldn't fit in the hole correctly.
I was able to pick up some setup disks from a reliable source, but none would read. I think the 5.25" drive is bad (no surprise).
Someone on eBay 3D printed a 5.25" half-height case and put a CF-to-IDE and OpenFlops into it (with rotary switch and OLED). So waiting on parts to be able to hook that all up.
But things are moving. I was able to use the OpenFlops to boot a setup disk image and configure the CMOS - but the battery wasn't set up correctly so it didn't save.
No comments:
Post a Comment